Port Devices

ELLIX 10 DRIVER DOWNLOAD

This is the appropriate scale for the recommended paper thickness. If it is connected incorrectly, the internal circuit fuse of the printer may be blown or the external power supply may be damaged. Otherwise, you may damage the power supply or the printer. Plug the DC cord connector into the power jack on the printer. Be sure to allow the printer head to cool down after printing before cleaning it. Be sure not to connect the external power supply with the wrong polarity. To remove the paper dust, clean the platen roller and paper roll end sensor with a cotton swab moistened with water.

Uploader: Aragore
Date Added: 26 January 2012
File Size: 10.16 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 19054
Price: Free* [*Free Regsitration Required]

To use the hexadecimal dump function, follow these steps: If you find that there is not enough paper remaining on the roll when the near-end detector is triggered, you can change the near-end sensor setting.

The printer head becomes very hot just after printing and is very dangerous. In this case, clean the printer head as follows: The data buffer allows the unit to receive ellux data even during printing.

Direct pickups are not available from our warehouses or offices. If the auto cutter does not return its normal position by itself, follow the steps below to correct the problem: This is the appropriate scale for the recommended paper thickness.

Recent Drivers  LASERJET M1522NF DRIVER

Turn on the power while holding down the FEED button. Also, be sure to turn off the printer power before cleaning the printer head. Tighten the screws on both sides of the cable connector.

ELLIX-10 User Manual

Otherwise pull it down to scale 1 or 2 as illustrated figure. Open the paper roll cover, remove the jammed paper, and reinstall the paper roll.

Please call us in advance to arrange a pickup. It has DIP switches that allow you to 01 communication settings, such as handshaking and parity check, as well as printing density. Open the paper roll cover by pressing the cover-open button.

Ellix | Central Cash Register

Then close the paper roll cover. The self-test checks are as follows; ellixx. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly. Be sure not to connect the external power supply with the wrong polarity.

The socket-outlet shall be near the equipment and it shall be easily accessible. Hexadecimal Dumping This feature lelix the experienced users to see exactly what data is coming to the printer. The buzzer and error LED beeps and blinks as like: Before connecting any cables, make sure that both the printer and the computer should be turned off. Recovery from eklix Auto Cutter Error If a foreign object such as a push pin or paper clip drops in the auto cutter and causes the auto cutter to lock up, the printer enters an error state.

Recent Drivers  DELL MONITOR E772C DRIVER

Make sure that the dllix is off. Caution Some semiconductor devices are easily damaged by static electricity. Therefore, pay attention to the following: Using an incorrect power supply may cause fire or electrical shock.

ELLIX User Manual |

Change the setting to the scale 1,2,3,4 and 5. Plug the DC cord connector into the power jack on the printer. Adjusting dllix roll paper Near-End sensor location This sensor has five settings, which are scale 1,2,3,4 and 5. Bar code printing is possible by using a bar code command.

You must be logged in to post a review. Install a new paper roll and the printer will continue printing. Attach the other end of the cable to the computer. Do not plug in the power cord.

Back To Top